Save Time & Skip the Line! Allow your members to check in on their mobile devices!
Pre-check-in on the way to your event!
Once you enter the building, scan a QR code to complete the check-in! If your check-in includes labels, they'll immediately print on a connected printer.
Note: To use Mobile Check-In, you must be using Amplify People.
Pre-Requisite
Ensure Self Check-In is Enabled
Note: If you've never set up Check-In in your ChMS, start here!
Within People, click on the Settings Gear at the top right, then on the Check-In tab, then click on the station you plan to use for Mobile App Check-In. Ensure the Allow Self Check-In checkbox is selected (below).
Note: All Check-In setup and configuration is managed within People. The Mobile App mirrors the settings you've already set up! Just enable the Check-In Module (below), and you'll be off!
Enable the Check-In Module
Navigate to Modules > Enable Modules and toggle on Check-In.
After making these changes, click Publish to take Check-In live in your Mobile App!
How to Use Self Check-In
Important: Mobile self-check-in is time-sensitive. A non-mobile check-in must occur to activate self-check-in on your mobile app. (We recommend you perform a non-mobile check-in 30 minutes before people arrive). Once activated, you'll notice a small blue beacon on the Check-In menu item.
Also, mobile self-check-in is automatically deactivated 1 hour after the last check-in has taken place.
Tap Check-In within your mobile app menu (shown below in the slideout menu style). The login screen will appear if a user still needs to log in.
After logging in, the member is presented with their connected family members to start pre-check-in.
Tap the individual(s) you want to check in, select the appropriate group, and tap Apply. (Again, the groups that appear depend on check-in setup within People).
Once you've selected every person to be checked in, tap Next to generate the pre-check-in QR Code.
When individuals arrive, they can scan the QR code at a check-in Kiosk to complete check-in. Labels (if configured) will dynamically print, and the guardian security code will be stored within the Check-In Module for easy verification at check-out later (below).
About the QR Code...
- The QR code is not lost if the screen or the Mobile App is closed. Open the app, tap Check-In, and the QR code will still display!
- As a security measure, a QR code must be used within 4 hours of being created.
Kiosk Requirements to Scan QR Codes
To scan QR codes, you must use either
- An iPad running the iOS Check-In App (scan via the iPad camera)
- A computer connected to a 2D scanner. (Most any 2D scanner will work. Just ensure it is "2D" to process QR codes).
Note: When using a 2D scanner, make sure the search bar is selected before scanning for PC or browser-based check-in. Otherwise, the self-check-in will not process.
Updated